The Best Wood Fillers for DIY Fixes to Wooden Surfaces, Tested
Cracks, divots, holes, or rot can crop up on wooden surfaces due to ordinary wear and tear and accidents, or during DIY projects. Fortunately, wood fillers can handle all sorts of repairs, and we tested some of the top wood fillers in several real scenarios to see how well they hid blemishes in wood grain or filled seams and gaps.
Wood fillers come in both water-based and solvent-based formulas. With the wide variety of wood fillers available—each having a unique formulation, usage scenario, and application technique—it can be tricky to pinpoint the right one to use. This guide will explain these practical putties and offer our hands-on testing results to help shoppers know how to choose the best wood filler for their needs.
- BEST OVERALL: Minwax Stainable Wood Filler
- BEST BANG FOR THE BUCK: Elmer’s E887Q Stainable Wood Filler
- BEST FOR BEGINNERS: Elmer’s E913 Carpenter’s Color Change Wood Filler
- UPGRADE PICK: FamoWood 40022126 Latex Wood Filler
- BEST FOR SEALING PORES: Aqua Coat Clear Wood Grain Filler
- BEST FOR HOLES: Goodfilla Heavy-Body Water-Based Wood & Grain Filler
- BEST FOR FURNITURE: Coconix Floor and Furniture Repair Kit
- ALSO CONSIDER: Elmer’s ProBond Wood Filler
How We Tested the Best Wood Fillers
We consulted with Jonathan Warshaw, a woodworking expert who is the founder and owner of SimpleWoodworker, an educational woodworking site. Warshaw says of wood fillers that “it’s crucial to look for one that is durable, easy to sand, and that can be painted or stained to match the surrounding wood.” He goes on to say that “the versatility of the filler for both interior and exterior projects, as well as its drying time, are also important factors to consider.”
As we tested, we got pretty scientific with this wood filler comparison. First, we found one piece of pine that was large enough to divide into separate sections for the different wood fillers. Then we divided each section into four segments, each with its own scenario:
- A screwdriver point driven into the wood both with and against the grain, meant to simulate the holes left by finish nailers;
- A ¼-inch hole drilled straight through the board;
- A chip of wood taken from the test piece with a chisel; and
- A “Charlie Olson,” or an errant hammer strike shaped like a C or O.
Once each section was properly damaged, we set forth with the wood fillers to fill them in. When they were dry, we sanded the fillers to see how well they cured the damage. The result gave us all the information necessary to suggest the best wood fillers based on their strengths and weaknesses.
Our Top Picks
Each of the following wood fillers was hands-on tested to ensure that our picks were up to snuff. We also organized these options based on features such as formula or intended use.
Best Overall
Minwax Stainable Wood Filler
This Bob Vila Approved product carries our brand’s highest level of recommendation.
Bob Vila Approved recognizes the household and DIY products that impressed us most in our real-world testing and that exemplify core values of the Bob Vila brand, including craftsmanship, innovation, and value for the dollar. Winners of this designation come recommended by our professional review team and are personally approved by Bob Vila.
Product Specs
- Type: Water-based
- Indoor or exterior: Both
- Stainable: Yes
What We Like
- Spreads easily despite its grainy consistency; suitable for pros as well as first-time users
- Minimal shrinking due to low moisture content in the formula
- Can fill large holes including cracks, gouges, nail holes, knot holes, and more
- No odor is left behind after use
What We Don’t Like
- Large fibers and grain might not seal small pores well
When it comes to versatile wood fillers, Minwax Stainable Wood Filler sits at the top of the heap. This water-based wax features a compound made with real wood fibers, leaving behind a strong, durable patch once dry. It’s suitable for indoor and outdoor wood filling, and it can take paint or stain.
During testing, the Minwax Stainable Wood Filler proved to be a joy to work with. Its relatively dry consistency leads to almost no shrinking at all once dry. Also, because of its consistency, we were able to roll small wads of it like putty to fill large holes. Despite its grainy consistency, it was easy to spread with a putty knife and sanded to a smooth texture. The only downside we could find is that the large fibers and grain could be too large to seal off small pores.
Get the Minwax wood filler at Amazon, Lowe’s, or Menards.
Best Bang for the Buck
Elmer’s E887Q Stainable Wood Filler
Product Specs
- Type: Water-based
- Indoor or exterior: Both
- Stainable: Yes
What We Like
- Incredibly easy to apply; precision applicator is more convenient than some larger containers
- Zero-odor formula is suitable for homes with children, pets, or a lot of traffic
- Does not shrink once it is mixed, lending to convenience and user-friendliness
What We Don’t Like
- Has a tendency to separate or break during shipping
Don’t want to lug around a pound of wood filler for a small-scale indoor or outdoor project? This 3.25-ounce, 7-inch tube of water-based stainable wood filler fits right in a pocket or tool box. Suitable for both indoor and outdoor projects, this wood filler also emits zero odor. Once dry, it can accept paint or stain.
During testing, we found the tube of Elmer’s stainable wood filler to have separated into a soupy liquid and a very stiff putty. After mixing (which was difficult to achieve in the tube), it reached a much better consistency and was easy to spread. The holes filled nicely, and despite its wetter consistency, it didn’t shrink much while drying.
Get the Elmer’s E887Q wood filler at Amazon.
Best for Beginners
Elmer’s E913 Carpenter’s Color Change Wood Filler
Product Specs
- Type: Water-based
- Indoor or exterior: Indoor
- Stainable: Yes
What We Like
- Goes on purple, then dries to match the wood color
- Leaves an excellent finish; formula is sandable, stainable, and paintable
- Minimal shrinking compared with some of the other options on the market
What We Don’t Like
- Indoor-only use, so it can’t serve as the only wood filler in a shed or shop
- A little thick compared to other viable options
Novice DIYers who aren’t sure how to tell whether wood filler is ready for sanding will want to consider Elmer’s Carpenter’s Color Change Wood Filler. This interior-only, no-mix, water-based product boasts a patented formula that goes on purple and then turns to a natural color when it’s dry and ready for sanding, staining, and painting. When applied to small repaired areas, the product’s color turns in as little as 15 minutes, and there’s no shrinking or cracking. When applied to deeper voids, the product dries in 2 to 8 hours.
Truth be told, we thought this product was a bit of a gimmick, so we didn’t have high hopes. In reality, it dried quickly without shrinking and sanded to one of the best finishes in the test. It was a little thick during application, but it packed well into the hole in the wood and sanded smoothly. This is definitely the real deal. The only downsides are that it’s a little thick (maybe because of the color additive), and it’s for indoor-only use.
Get the Elmer’s E913 wood filler at Amazon or Walmart.
Upgrade Pick
FamoWood 40022126 Latex Wood Filler
Product Specs
- Type: Water-based
- Indoor or exterior: Both
- Stainable: Yes
What We Like
- Creates a smooth finish that fills pores on most wood varieties
- Thick but easy to spread; suitable for DIY users as well as professionals
- Dries harder than wood; becomes completely hard in 15 minutes
What We Don’t Like
- Can be frustrating to open the container for the first time
For those looking for a premium product, the FamoWood wood filler is a worthy option. It has the versatility and viscosity to handle voids of different sizes, so one tub can handle almost any type of project. The formula is a combination of latex and real wood fiber, and it’s suitable for indoor and outdoor applications. Also, the filler cures in 15 minutes to a harder-than-wood surface. Once dry, it can be sanded, planed, or sawed. It can also be stained or painted.
Here’s the deal: This wood filler is thick. It’s so thick, in fact, that it settled to the lid of the tub and was extremely frustrating to open. However, once we got the tub open, FamoWood did nothing but wow us. Yes, it’s thick, but it was the easiest and smoothest to spread. It also rolls into small wads for plugging holes. The finish left behind was almost entirely shrink-free, and it filled the pores of the test piece entirely.
Get the FamoWood wood filler at Amazon or Walmart.
Best for Sealing Pores
Aqua Coat Clear Wood Grain Filler
Product Specs
- Type: Water-based
- Indoor or exterior: Indoor
- Stainable: Yes
What We Like
- Water-based, eco-friendly formula is suitable for the chemical-conscious consumer
- Seals pores very well; suitable for minimizing the absorption of top coats
- Gel consistency leads to easier application relative to other options on the market
What We Don’t Like
- Formula is made for interior use only and is not suitable for outdoor projects
- Shrinks a lot more than some comparable products
Some wood filler applications don’t require a thick, opaque layer of product. Those who prefer a simple, light, see-through coat that simply seals pores will want to check out Aqua Coat Clear Wood Grain Filler. This wood filler has a thick, milky texture that dries to a clear finish, and since it’s eco-friendly and water-based, cleanup is a breeze.
Admittedly, there are few applications for a wood filler product that doesn’t actually make holes and gouges disappear. However, when it comes to sealing pores, we found Aqua Coat to do an outstanding job. It applied easily and created a smooth, glass-like finish over the wood. Since it’s water-based and eco-friendly, it’s a better choice than polyurethane (for some applications). The downside is that it doesn’t fill holes particularly well, and it does shrink quite a bit. But keep in mind that this product is for sealing pores, not filling holes.
Get the Aqua Coat wood filler at Amazon or Walmart.
Best for Holes
Goodfilla Heavy-Body Water-Based Wood & Grain Filler
Product Specs
- Type: Water-based
- Indoor or exterior: Both
- Stainable: Yes
What We Like
- Excellent for filling large holes in flooring, windowsills, doors, tables, furniture, and more
- Doesn’t shrink after application, providing peace of mind and ease of use
- Odor-free formula is ideal for homes with heavy traffic, children, or pets
- Easily dilutable and comes in several color options for added convenience
What We Don’t Like
- Not easy to spread out of the tub; there may be a learning curve for new users
There are nicks and scrapes, and then there are large holes left from screws, lag bolts, and even carpenter bees. For those big, gaping holes, Goodfilla Water-Based Wood Filler might be the product to choose. This wood filler has a clay-like consistency that doesn’t shrink when dry, and it’s stainable and paintable.
As it came out of the tub, we noticed that Goodfilla didn’t spread easily, so it’s not exceptional for filling scrapes or small spots. We were able to dilute it with a bit of warm water to create a more spreadable consistency, although the clay-like consistency made it very easy to wad into small balls and fill large holes. It’s also odor-free, doesn’t shrink at all, and is suitable for indoor and outdoor use.
Get the Goodfilla wood filler at Amazon or Tractor Supply Co. (walnut color only).
Best for Furniture
Coconix Floor and Furniture Repair Kit
