The Best Table Saw Blades

Hello, my friend, hello again; today we come together to talk about The Best Table Saw Blades and hope the blog can help you.

Whether you rip a stack of boards or make precision grooves for cabinetry, this list makes the cut for some of the best table saw blades.

While a good table saw makes large jobs easier and more accurate when it comes to cutting wood, a good blade is a thing of beauty. A high-quality blade used for the right job can help you achieve the intended results, but the wrong blade can quickly ruin a DIY project or let the smoke out of your table saw.

Stroll through the saw blade section of the tools department in your local home improvement store and you’ll soon realize that you have many options to consider. Selecting the right blade for your type of table saw and your projects can be confusing. To make it easier, we hand-tested some of the best table saw blades on the market and are sharing the results below.

Whether you need a high-quality all-purpose blade to cover all your needs or a specialty blade for making ripping lumber more efficient, read on to learn about some of the best options available, so you can make the best choice.

1. BEST OVERALL: Forrest WW10307100 Woodworker II 10″ Saw Blade
2. BEST BANG FOR THE BUCK: DeWalt 10″ Miter/Table Saw Blades, Combo Pack 
3. BEST FLAT-TOOTH RIPPING: Freud LM72R010 10″ 24-Tooth FTG Ripping Saw Blade
4. BEST COMBINATION: Diablo by Freud D1050X 10″ 50-Tooth Combo Saw Blade
5. BEST ROUGH-CUT BLADE: Concord Blades 4⅜” 30-Tooth Saw Blade
6. BEST FOR PLYWOOD: Freud LU80R010 10″ 80-Tooth Ultimate Plywood Blade

How We Tested the Best Table Saw Blades

We looked for three main things in this review: quality of cut, low vibration, and edge crispness. When building up the trim on a job site or making woodworking projects at home, we looked for blades that delivered edges with no tear-out and that were ready—or near ready—for paint.

We also looked for tooth configurations, the carbide quality, and the general sharpness that produced those cuts without overly taxing the saw in finger-jointed primed pine, solid sawn red oak, maple plywood, and framing lumber.

Our Top Picks

From some of the best all-purpose saw blades that can handle various cutting demands to some of the best specialty blades to cut grooves and rip boards, we field-tested some of the best table saw blades on the market in order to make it easier for you to pick the right one for your work. For saw blades that will make the most of your time behind the table saw, make the most of the work you’re doing and the things you’re making, and make the most of your budget, take a look at these blades. Read on to consider the hands-on reviews of some of the highest-rated table saw blades.

Best Overall

Forrest WW10307100 Woodworker II 10" Saw Blade

See It

While the price for this top-of-the-line Forrest table saw blade might seem excessive, its high performance and multiuse capability make it worth the extra cost. With its alternate top bevel tooth configuration, this blade performs both the smoothest rip cuts and crosscuts of the blades tested.

Although it left micro-swirls on the edges of finger-joint pine, they were barely visible. A nice steady feed rate makes glue-line joints possible. It has hand-brazed C-4 carbide teeth, and Forrest will not only resharpen the blade when needed, the company will bring it back to factory specs for much less than the cost of a new blade. Over time, there is great value there, because the user will always have a top-drawer blade. It even ships with an excellent guide for setting up a table saw; we can feel the people behind this product. Its price tag is higher, but there’s more blade for the buck and service to boot.

Product Specs 

• Tooth configuration: Alternate top bevel
• Carbide: C-4
• Blade plate: Uncoated

Pros

• Compared to similar options, this blade provides the cleanest, quietest cut
• Lowest chatter and tear-out in our list of recommendations
• Super-supportive company; can resharpen blades and restore to factory specs for users

Cons

• Most expensive blade in the group due to added benefits and features

Get the Forrest table saw blade at Amazon, Acme Tools, or Forrest.

Best Bang for the Buck

DeWalt 10" Miter/Table Saw Blades, Combo Pack

See It

These DeWalt blades are priced at just a fraction of other blades, offering the best deal we could find when it comes to outfitting a table saw in this test group—and both blades in this two-pack perform really well. The 60-tooth fine-finish blade is just that. It leaves only micro-swirls in finger-joint pine, and its cuts are nearly jointer-smooth in maple plywood with zero tear-out. This blade can even handle plowing through the occasional 2×4, though it really draws on the tool to do this.

The computer-balanced trim blade was the third smoothest in the group tested. The 32-tooth construction blade handles that 2×4 just fine and leaves clean, passable cuts for paint-grade trim in finger-joint pine. It swirled up red oak edges and delivered no tear-out cuts in maple plywood.

Product Specs 

• Tooth configuration: Alternate top bevel
• Carbide: Tungsten carbide
• Blade plate: Uncoated

Pros

• The finish blade was clean and quiet, leaving only micro swirls behind
• Both blades ran smoothly, leaving little chatter on the trim boards
• Construction blade blew through knotty Douglas fir framing lumber

Cons

• Less carbide on the teeth; may wear faster relative to other more robust options

Get the DeWalt miter/table saw blade at Amazon, The Home Depot, or Acme Tools.

Best Flat-Tooth Ripping

Freud LM72R010 10" 24-Tooth FTG Ripping Saw Blade

See It

This blade is purpose-built for serious ripping and glue-line joints. Featuring a full ⅛-inch thick kerf with an expansion slotted blade plate, the square top carbide teeth on this unit are huge and super sharp. For woodworkers who break down rough-sawn lumber, this is a blade to look at. With the saw set up correctly, it’ll plow through hardwoods with minimal vibration and leave cuts straight and smooth enough that they can be glued together.

The blade’s 24 teeth are made of high-density carbide that Freud refers to as its “ripping blend,” meaning it will last longer and hold up better whether cutting softwoods or hardwoods. The extra-large flat tooth design leaves a smooth finish and eliminates the need to sand or joint. Its Silver I.C.E coating on the blade plate resists buildup from the sticky pitch in lumber.

Product Specs 

• Tooth configuration: Square top, ripping
• Carbide: High-density titanium cobalt carbide
• Blade plate: Coated

Pros

• Outstanding carbide and tooth configuration; ideal for heavy-duty work
• Features a full kerf with expansion slotted blade plate
• Delivers glue-line joints, even on a benchtop table saw

Cons

• Purpose-built for ripping only; not an all-around option

Get the Freud ripping table saw blade at Amazon or Acme Tools.

Best Combination

Diablo by Freud D1050X 10" 50-Tooth Combo Saw Blade

See It

Sitting right in the sweet spot between ripper and crosscut is the Diablo by Freud, which makes for an excellent combo blade. The Diablo breaks up its 50 teeth into 10 sets of five. Each group includes closely set teeth angled just aggressively enough for ripping while still maintaining a smooth finish for cross-cutting. It was the second-smoothest running blade in the group and left minimal chatter on the wood we ran through it.

The large gullets that separate each group help clear larger amounts of material than a dedicated finish blade when making rip cuts. The laser-cut stabilizer vents trap noise and vibration, which keeps it cool and reduces blade vibration. Laser-cut heat expansion slots allow the blade to expand due to heat buildup, which holds the cut true and straight. Add to that its durable shock-resistant carbide construction, and this is a blade that’s ready to take on the lion’s share of the table saw’s workload.

Product Specs 

• Tooth configuration: Combination, clusters of 4 ATB teeth with a square top raker
• Carbide: High-density titanium cobalt carbide
• Blade plate: Coated

Pros

• Outstanding tooth configuration in 10 sets of 5 for a total of 50
• Thin kerf allows for less wasted wood and less sawdust
• Delivers low-vibration, crisp cuts; great for most table saw projects

Cons

• Might not be ideal for lots and lots of ripping

Get the Diablo table saw blade at Amazon, The Home Depot, Acme Tools, or Northern Tool + Equipment.

Best Rough-Cut Blade

Concord Blades 4⅜" 30-Tooth Saw Blade

See It

Concord’s general-purpose blade works well on softwoods but is even tougher on hardwoods. Thin kerf, ATB with wide gullets, and 30 teeth are for framing and ripping; there’s no need to even check and see if it leaves a clean cut because that’s not what it’s for. This blade is meant for one thing: production ripping in softwood lumber on a job site. This professional-quality construction-grade blade excels at ripping and crosscutting thick hardwoods up to 3½ inches thick and softwoods up to 1 inch thick.

It plowed through Douglas fir 2×4 and hardly taxed the saw at all. It left a rough edge, but the cuts it produces are meant to be buried behind drywall. It works as it should and does so well. When it gets dull, toss it and get another one; given how affordable it is, it’s a high-performing option that you won’t mind replacing.

Product Specs 

• Tooth configuration: Alternate top bevel
• Carbide: Titanium carbide
• Blade plate: Uncoated

Pros

• Can process 2×4 lumber very quickly without wearing out the saw
• Thin kerf helps provide accurate cuts without much waste
• Delivers low vibration in tough cuts for easier control

Cons

• Built for speed, not for smooth cuts

Get the Concord Blades table saw blade at Amazon.

Best for Plywood

Freud LU80R010 10" 80-Tooth Ultimate Plywood Blade

See It

The more premium and/or brittle the material one is cutting—fine plywood, hardwood moldings, and melamine—the more tear-out is noticed and as unwelcome as it is, can be harder to repair. Therefore, a blade’s tooth geometry needs to be more dialed into these specifics in order to minimize these problems. Freud’s ultimate plywood and melamine blade with 80 teeth with 2-degree hook angles, shallow gullets, and high alternate top bevel tooth configuration delivers. Although it’s better at crosscuts than rips, it’ll still rip extremely well.

Additional premium features—including anti-vibration slots to dissipate heat and Freud’s nonstick-finish coating to reduce blade drag—help to make work easier. Topping things off are the big, super-sharp, gnarly carbide teeth—truly a thing of beauty.

Product Specs 

• Tooth configuration: High alternate top bevel
• Carbide: Premium TiCo high-density carbide crosscutting blend
• Blade plate: Coated

Pros

• High ATB premium carbide that can last through heavy use
• Purpose-built for premium materials such as fine plywood and hardwood moldings
• Coated blade plate helps reduce blade drag and makes work easier

Cons

• Good tools like this blade aren’t cheap; this one is noticeably pricier than other options

Get the Freud plywood table saw blade at Amazon, Acme Tools, or Ace Tool.

Jump to Our Top Picks

What to Consider When Choosing a Table Saw Blade

Determining which table saw blade is right for your needs can be overwhelming. Read on to learn about the factors to consider before making a purchase.

Types of Table Saw Blades

Understanding how saw blades meet specialized needs is crucial to picking the right one for the job. Below are some common types of saw blades you can buy.

Crosscut 

First, it should be pointed out that while there is some crosscutting in table saw use, the majority of cuts made on table saws are rip cuts that run along the length of the board. Some woodworkers crosscut, but that often requires jigs and rigs that the typical garage woodworker, DIYer, and even contractor doesn’t use, so the emphasis in this article is heavily skewed to performance in ripping applications.

Manufacturers design crosscut saw blades to make smooth cuts across the wood’s grain.