The Best Concrete Bonding Agents of 2024 for Your Project
Hello, my friend, hello again; today we come together to talk about The Best Concrete Bonding Agents of 2024 for Your Project and hope the blog can help you.
With the right additive, your concrete repair can stand the test of time. Check out these top concrete bonding agents for long-lasting results.
A lot goes into tackling a concrete repair or project. Unlike a carpentry project, you can’t just grab a stack of lumber and get to work. You have to wait for the right weather conditions, select the right cement mix, use the proper ratio, and work fast enough that the concrete doesn’t begin to set before you’re ready. You want to mix it right the first time to make sure it adheres properly.
To help avoid an unfortunate scenario, use the best concrete bonding agent. Whether mixing the agent with a slurry or using an agent to bond two concrete surfaces together, a high-quality product can get the job done.
Our pick as the best overall concrete bonding agent is the Quikrete Concrete Crack Seal. We chose it for its precision application tip, large 38-linear-foot coverage area, and quick 72-hour curing time. However, all of the selected concrete products on this list were vetted for effectiveness and reliability.
This guide will help you choose from some of the best concrete bonding agents for your project. Plus, some of these products have been hands-on tested by our staff to ensure they were up to snuff.
- BEST OVERALL: Quikrete Concrete Crack Seal
↓ Jump to Review - RUNNER-UP: Quikrete Concrete Bonding Adhesive
↓ Jump to Review - BEST BANG FOR THE BUCK: Quikrete Acrylic Fortifier
↓ Jump to Review - BEST FOR COLD TEMPERATURES: SikaLatex Concrete Bonding Adhesive
↓ Jump to Review - BEST FOR CONCRETE BLOCKS: Liquid Nails Landscape Block Adhesive
↓ Jump to Review - BEST FOR CRACKS: Sikaflex Self-Leveling Sealant
↓ Jump to Review - BEST POLYURETHANE: Loctite PL Premium Polyurethane Construction Adhesive
↓ Jump to Review
How We Chose the Best Concrete Bonding Agents
We researched the most sought-after concrete bonding agents in their respective categories and discovered that the best options are determined by their adhesion, coverage area, ease of use, and other features included by top brands.
After extensive product research, we included concrete products in our list of top picks made with polyurethane, latex, acrylic, and more for weatherproof adhesion. These products provide coverage for areas between 24 and 38 linear square feet and those up to 75 square feet. They can be used on driveways, walkways, patios, garages, basements, and more.
We also wanted to make sure that these concrete adhesives were easy to apply, so we included products with precision tips, caulking gun containers, and solutions that could be added to concrete mixes or applied with sprayers. Finally, we also included products that have self-leveling formulas that are suitable for a variety of materials. We even listed options that could be painted, stained, or sanded after application.
Our Top Picks
Before you call in an expert in concrete crack repair, take a look at these top products. These bonding agents for concrete included some that were hands-on tested, and each of our picks is organized by category and comes with a list of pros and cons.
Best Overall
Quikrete Concrete Crack Seal
Photo: Amazon
Product Specs
- Coverage area: 38 linear feet
- Curing time: 72 hours
- Application: Precision tip
What We Like
- Comes with a precision applicator for filling in cracks up to ½ inch wide and ¼ inch deep
- The 1-quart bottle has enough product to cover 38 linear feet of cracks and breaks
- Can be used in temperatures above 45 degrees Fahrenheit; will not shrink or warp
What We Don’t Like
- Long curing time compared with some other options on the market
Quikrete Concrete Crack Seal provides an affordable and effective solution to broken or cracked driveways, walkways, and commercial areas. Based on reviews and hands-on testing, this 1-quart bottle can fill 38 linear feet of cracks up to ½ inch wide and ¼ inch deep.
This self-leveling latex concrete crack filler also provides a durable and non-shrinking finish, is safe to use in temperatures above 45 degrees Fahrenheit, and has a curing time of 72 hours. Plus, it can be used right out of the bottle and has a precision applicator tip.
What our tester says: Mark Wolfe, a Bob Vila staff writer and product tester, noted about this product in the Best Concrete Crack Filler that “Quikrete Concrete Crack Seal worked as described in our tests. It was one of the easiest products to apply, and there was no need for specialized tools. There is nothing to add, and it only needs to be agitated for a minute or two before applying. This latex repair solution has a working texture much like thick paint, allowing it to seep smoothly into narrow cracks. However, it cures slowly enough to flatten out for a nice smooth finish.”
Get the Quikrete latex concrete bonding agent at Lowe’s or The Home Depot.
Runner-Up
Quikrete Concrete Bonding Adhesive
Photo: The Home Depot
Product Specs
- Coverage area: 35 to 75 square feet
- Curing time: 2 to 3 hours
- Application: Brush, roller, or spray
What We Like
- Versatile formula can be used as a primer, slurry coat, or concrete resurfacer for smooth and repaired concrete
- Can be applied with a brush, roller, or spray depending on the intended use
- Can be used on a variety of surfaces including concrete, pavement, pipes, and more
- Clings to smooth materials to keep dirt and contaminants off the surface
What We Don’t Like
- Not suitable for use on porous surfaces; some prep may be required before application
- The product should be used promptly after purchase as it can expire and lose its effectiveness
For a concrete bonding agent that can help create a first-rate finished product on a range of different concrete projects, check out Quikrete’s Concrete Bonding Adhesive. Use this product as a paint-on adhesive, coating the base surfaces with a sprayer, roller, or brush before applying a fresh coat of concrete. Alternatively, mix it with a slurry in place of water, using two parts cement to one part bonding agent.
One of the best features of this agent is that it doesn’t require the user to roughen the surface before applying. While other products might require laborious scuffing with a wire brush, the adhesive will cling to smooth surfaces, provided they’re free of dirt and contaminants.
Get the Quikrete concrete bonding agent at Lowe’s or The Home Depot.
Best Bang For The Buck
Quikrete Acrylic Fortifier
Photo: The Home Depot
Product Specs
- Coverage area: Customizable
- Curing time: 3 hours
- Application: Mixed with cement and applied
What We Like
- Can be added to a current cement mix for increased adhesion and durability
- Begins to harden in just 5 minutes and completely dries in 3 hours
- Affordable compared with some other options currently available
What We Don’t Like
- Must be mixed before use according to the manufacturer’s directions
Repairing cracks, chips, and missing chunks from the edge of a concrete surface can be a messy proposition unless you use time-consuming forms to hold the slurry in place. To save time and money on the next repair, consider this Quikrete Acrylic Fortifier.
The agent mixes in with the cement mixture in place of water. It promotes adhesion with the existing concrete while also stiffening the concrete mix, so it holds in place without sliding off the pad. This fortifier makes the concrete mix begin to harden within 5 minutes, so be sure to mix only as much as you can use in that time frame.
Get the Quikrete acrylic concrete bonding agent at The Home Depot.
Best For Cold Temperatures
SikaLatex Concrete Bonding Adhesive
Photo: The Home Depot
Product Specs
- Coverage area: Unlisted
- Curing time: 24 hours
- Application: Brush, roll, or spray
What We Like
- Improved adhesion strength and durability; can be used for bonding concrete to concrete, mortar, grout, stucco, and terrazzo
- Resists shrinkage in freezing temperatures and does not produce a vapor barrier
- Comes in multiple sizes to accommodate small to large projects
What We Don’t Like
- Takes a long time to dry relative to other options on the market
If cold temperatures threaten to wreak havoc on your concrete repair, consider SikaLatex Concrete Bonding Adhesive. Brush, roll, or spray it onto the existing concrete surface, or use it as a water replacement in a concrete or mortar slurry. Alternatively, use it in a grout mixture—a particularly attractive option for tile floor surfaces in unheated mudrooms.
While it works as a fortifier and bonding agent, the acrylic polymers increase the repair job’s resistance to freeze-thaw cycles, allowing the concrete patch repair to last longer. If used as a repair slurry, coat the area and immediately apply a finish coat, speeding up the repair time considerably.
Get the SikaLatex concrete bonding agent at Amazon or The Home Depot.
Best For Concrete Blocks
Liquid Nails Landscape Block Adhesive
Photo: Amazon
Product Specs
- Coverage area: 30 linear feet
- Curing time: 24 hours
- Application: Caulking gun
What We Like
- Creates a weatherproof bond that will not shrink or warp with changing weather
- Suitable for use on brick, masonry, or concrete surfaces; treats up to 30 linear feet of cracks up to ¼ inch deep
- Easy to apply with a caulk-style precision applicator
What We Don’t Like
- Takes a long time to dry relative to other options on the market
- Larger projects may call for a large application volume for proper adhesion
Block walls have lots of places where water can sneak in and cause serious issues. Liquid Nails Landscape Block Adhesive creates a weatherproof bond that resists water’s effects, resulting in a long-lasting concrete wall, garden bed, or masonry project.
The Liquid Nails mixture comes in 10-ounce tubes that are easily installed in a standard caulking gun. This allows application of just the right amount of product without having to deal with messy cement bags, buckets, and mixing. Simply squeeze the appropriate amount on the base course of blocks and set the new course on top. It can be used to build new walls or repair old ones, and it works with concrete, stone, and brick materials.
Get the Liquid Nails concrete bonding agent at Amazon, The Home Depot (12-pack), or Walmart.
Best For Cracks
Sikaflex Self-Leveling Sealant
Photo: Amazon
Product Specs
- Coverage area: 24 linear feet
- Curing time: 1 to 2 hours (dry), 3 to 5 days (cured)
- Application: Caulking gun
What We Like
- Flexible and self-leveling formula fills cracks up to 1½ inches wide and ½ inch deep
- Suitable for driveways, sidewalks, garages, and some pavement varieties
- Can be stained, painted, and sanded after it’s cured to blend into any surface
What We Don’t Like
- 3- to 5-day curing time may not be ideal for commercial concrete applications
Ease of use and effectiveness meet in this concrete bonding agent from Sikaflex. Made to be applied with a caulking gun, this adhesive is self-leveling, fills cracks 1½ inches wide, and remains flexible after application, even when submersed. The 10.1-ounce container fits most caulking guns and covers up to 24 linear feet of cracks on concrete driveways, garages, sidewalks, and some pavements.
Once cured in 3 to 5 days, this concrete sealer can be stained, painted, and sanded. However, this is the longest curing time of any of the adhesives on this list.
What our tester says: Mark Wolfe, a Bob Vila staff writer and product tester, had this to say in our guide: “Sikaflex was so affordable, effective, and easy to use, even though it took a bit longer to cure than other options. We tested the XL size, and it delivered excellent results. It went on smoothly with average hand pressure and no drips. It settled neatly into the cracks and formed a tack-free skin after a few hours. Full cure took 5 days in our cool temperatures, which was longer than most of the other products we tested.”
Best Polyurethane
Loctite PL Premium Polyurethane Construction Adhesive
Photo: Amazon
Product Specs
- Coverage area: Unlisted
- Curing time: 30 minutes (dry), 24 hours (cured)
- Application: Caulking gun